Effects of voltage and sodium fluoride concentration on performance of anodic oxidation film on titanium alloy 电压和氟化钠浓度对钛合金阳极氧化膜性能的影响
Prepare and Research on a Pulse Current Hard Anodic Oxidation Film for Aluminum-copper Alloy 铝铜合金脉冲硬质阳极氧化膜的制备与研究
Effect of H_2SO_4 Concentration on the Quality of Hard Anodic Oxidation Film on Aluminum Alloy 6061 H2SO4浓度对6061硬质阳极氧化膜层质量的影响
The wire was coupled on the plug. Discussion on the Influence of Conductor's Oxidation Film to Connecter Current 这条导线接到了插头上。浅谈导线氧化膜层对接头导流的影响
The effects of current density and oxidation time on thickness and hardness of the obtained anodic oxidation film were studied. 为了研究阳极氧化工艺条件对硬质氧化膜的厚度、耐蚀性、表面形貌的影响。
In a given anodic oxidation condition, a hard anodic oxidation film can be obtained on the surface of aluminum-matrix composite with an excellent anticorrosion. 在适当阳极氧化工艺条件下,颗粒增强铝基复合材料表面可以制得优良耐蚀性的硬质阳极氧化膜。
With fine ability to clear off oxidation film, The width of clearing film can be adjusted continuously to make out good-looking welding seam. Flux entrapped in the joints is the principal cause of low strength or failure. 超强清理氧化膜能力,清理宽度连续可调,焊缝光亮美观。裂缝中封存有焊药是强度不足或断裂的主要原因。
Properties of Surface Oxidation Film in CMP of Computer Hard Disk Substrate 计算机硬盘基片CMP中表面膜特性的分析研究
Discussion on the Influence of Conductor's Oxidation Film to Connecter Current 浅谈导线氧化膜层对接头导流的影响
Peeling of oxidation film and oxidation-decarbonization are more serious on the surface than on the sub-surface. 试样表面的氧化腐蚀及氧化皮剥落均比次表层严重,表面的开裂也加速了次表层裂纹的形核和扩展。
Prepare of a High Hardness Anodize Oxidation Film on 6061 Aluminum Alloy Sheet 6061铝合金薄板高硬度硬质阳极氧化膜的制备
Effects of Pulse Frequency and Duty Cycle on Micro-arc Oxidation Film of RE-Mg Alloy 脉冲频率及占空比对稀土镁合金微弧氧化膜的影响
Research on Hard Discs Maintenance and Information Security Development Properties of Surface Oxidation Film in CMP of Computer Hard Disk Substrate 计算机硬盘维护与信息安全开发技术研究计算机硬盘基片CMP中表面膜特性的分析研究
Formation Mechanism of Oxidation Film Inclusion in Aluminum Alloy and the Control Measures during Casting& Melting Procedure 铝合金中氧化膜夹杂形成机理及熔铸工序控制措施
The breakdown of anode oxidation film on highly pure aluminum in organic electrolyte and the process of electrolyte spark were described, and the mechanism was discussed. 简述了高纯铝在有机电解质中形成的氧化铝膜的击穿和电解液闪火的过程,分析了氧化铝膜击穿和电解液闪火的机理。
According to the requirement of the mechanical properties and oxidation film of 6063 alloy, the best plan of alloy component is presented. 根据对6063合金力学性能和氧化膜的要求,提出了最佳的合金成分方案。
This article summarized the anodic oxidation film of the aluminum and the aluminum alloy electrolysis coloration developing process, coloration mechanism and the newest progress at function film. 本文综述了铝及铝合金阳极氧化膜电解着色技术的发展过程、着色机理及在功能方面的最新研究进展。
Power substrate was prepared by aluminium anode oxidation in sulfuric acid electrolyte which consists of carboxylic acids and organic compounds. The effects of current density and oxidation time on thickness and hardness of the obtained anodic oxidation film were studied. 在添加羧酸和有机化合物的硫酸电解液中,采用阳极氧化的方法制备了电路铝基板衬底,研究了电流密度和氧化时间对氧化膜厚度和硬度的影响。
According to the analysis of mechanism and formation process of the passive layer, the analysis was made on the influence of tin content to the conductivity and thickness of the oxidation film of lead alloy. 在对腐蚀钝化阻抗层形成过程和机理进行分析的基础上,分析了锡含量对铅合金阳极氧化膜电导和厚度的影响。
Study of Moderate Temperature Sealing Process for Aluminum Anodic Oxidation Film 铝阳极氧化膜中温封孔工艺研究
Study on Anodic Oxidation Film of Die-casting Magnesium Alloy 压铸镁合金阳极氧化膜的研究
Oxidation Film on Surface of TiN Coating TiN涂层表面氧化层研究
Effects of electrolyte and additive's concentration on the thickness and hardness of micro-arc oxidation film in Na_ ( 2) SiO_ ( 3) solution were studied. 研究了在Na2SiO3系电解液中电解质浓度和添加剂浓度对铝合金微弧氧化膜层厚度和硬度的影响。
Measurement of Thickness and Microhardness of Hard Anodic Oxidation Film on Aluminum Alloy 铝合金硬质阳极氧化膜厚度及显微硬度测试方法研究
Surface oxidation film of Mg alloy casting in dry graphite silica sand mold was analyzed by XPS. The constituent and structure of surface oxidation film were discussed. 利用XPS(X射线光电子能谱)对镁合金石墨砂型铸造时的表面氧化膜进行了分析,探讨了表面氧化膜的组成与结构。
Preparation and Characterization of TiO_2 on Surface of Alumina-Anode Oxidation Film 铝阳极氧化膜表面TiO2的制备和表征
The influences of electrolyte components and preparation parameters on the film-forming process as well as properties of oxidation film were discussed. 对电解液中的各组分在成膜过程中的作用及电解工艺参数对成膜过程和膜层性能的影响进行了研究探讨。
Sulfuric acid anodic oxidation makes the surface of the composites form three morphologies and structures: A12O3 porous anodic oxidation film, exposed surface of the SiC particles, rough and uneven surface around SiC. 硫酸阳极氧化使复合材料表面形成了Al203阳极氧化多孔膜、裸露的SiC颗粒表面和SiC颗粒周围凹凸不平的粗糙表面三种表面结构。